Pool Flocculant -Aluminum Sulfate

Function: Granular Flocculant is added to the skimmer basket after backwashing to put a gel like coat on the filter which enables particles which would normally pass through the filter to be filtered out. Not suitable for use with cartridge filters or diatomaceous earth filters.

Dosing Instructions (Pools)

Backwash the filter.

Add 250 grams of Granular/Powder Flocculant per 10,000 gallons of pool water into the skimmer or strainer basket.

The pool filter should run continuously for at least 24 hours and only backwashed during this time if the pressure rises to the level recommended for backwashing.

In the event of backwashing repeat dose

Other Applications: Water effluent treatment system It's used for purification of drinking water and wastewater treatment by settling of impurities by means of precipitation and flocculation. Paper Industry It helps in sizing of paper at neutral and alkaline pH, thus improving paper quality (reducing spots and holes and improving sheet formation and strength) and sizing efficiency. Textile Industry It is used for color fixing in Naphthol based dyes for cotton fabric. Other Uses Leather tanning, lubricating compositions, fire retardants; decolorizing agent in petroleum, deodorizer; food additive; firming agent; dyeing mordant; foaming agent in firefighting foams; fireproofing cloth; catalyst; pH control; waterproofing concrete; aluminum compounds, zeolites etc